Stainless Steel Farmhouse Sinks – An undermount stainless steel sink is easy to clean and maintain. They are scratch resistant and easy to install. Built-in sinks can be installed on virtually any type of counter. Installing an undermount stainless sink can be a simple process as you have the moderate knowledge and the right tools. By doing this project you can save a lot of money. Measure the sink with the hole in the counter, using a tape measure. Put the sink on the counter and have an assistant hold it in place.
Measure from the bottom of the sink to the bottom of the stainless steel farmhouse sinks cabinet. These measures and 2-by-4 with the circular cutting saw. Place the 2-by-4 under the sink to hold. Attach the mounting clips to the bottom of the sink every three inches and pull them down with the pliers. Do this all the way around the bottom of the sink. Caulk around the sink to make a seal that will not leak. Place the drain pipes in. Start with the drain that has plumber putty around it.
Push the drain down and tighten the drain from the bottom with the channel locks. Wipe off excess caulk around the drain. Remove the 2 by 4 below the stainless steel farmhouse sinks and prepare to put in the drain. Place the drain PVC, using the PVC pipe and trap. Tighten all clamps with the channel locks.